PIETTA FRONTIER, PISTOLERO, GREAT WESTERN II MAGNA-TUSK 1P IVORY GRIPS GW 2 ~ QR

Description

Arizona Custom Grips
PIETTA
* PIETTA (CIMARRON) FRONTIER;
* PIETTA (EMF) GREAT WESTERN II (includes
most
GW II models); and
* OTHER PIETTA SAA REVOLVERS (Cimarron Pistolero, El Malo, etc.)
(See below for further details)
~ Exclusive ~
MAGNA-TUSK
™
IVORY GRIPS
With QR Coded Packaging
Milled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag.  See below for details.
~~~~~~
oNE-PIECE (nO SCREWHOLE) STYLE
One-Piece vs. Two-Piece Grips
: Many people prefer the clean lines of a grip without a screwhole (One-Piece), while others prefer the look and convenience of a Two-Piece grip (with a screw), which is easier to remove for cleaning or maintenance.  Both styles were originally made by Colt in the 1800’s, and both are historically correct.  Whichever style you choose really depends on the look you are after.  We manufacture both styles.
Note:
ANY
of our grips, whether ONE-PIECE
OR
TWO PIECE style, will interchange and work on either style of grip frame.
THIS AUCTION IS FOR THE ONE-PIECE (NO SCREWHOLE) STYLE.
One-Piece grips use a spacer (user installed) between the panels instead of a screw, which results in a rock-tight fit.  Our Two-Piece grips on the other hand come with a free Conversion Kit to enable use on your grip frame, without any modification of your revolver.  Full instructions with illustrations are included with each set of grips.  Whichever style you choose, you are guaranteed to get the best quality grips on the market, made to last a lifetime, for your shooting pleasure and enjoyment.
10292000
~~~~~~
WHAT THESE WILL FIT – Please read this in its entiret
y:
This auction is for a set of Genuine Magna-Tusk™ Ivory grips for any of the
PIETTA
Model 1873 SAA (Single Action Army) style revolvers, with the standard SAA “plowhandle” grip shape, such as the Cimarron
Frontier
, or the EMF
Great Western II (both made by Pietta)
.  These will usually be marked “Pietta,” and may also (but not necessarily) be marked by the U.S. importer, such as “Cimarron,” “EMF,” “Taylors & Co.,” “Traditions,” etc.
This includes any of the following:
·
Cimarron
Frontier
or
Stainless Frontier
·
Cimarron
El Malo
(
NOT
the El Malo 2)
·
Cimarron
Pistolero*
·
E.M.F.
Great Western II
(available in numerous variations including
Gunfighter, Buntline, Californian, Grande Californian, Cattlebrand, Dlx Stainless Steel, Frontier & U.S. Marshall, Gambler’s Royale, General Patton, Liberty, Paladin, Sheriff, Posse, The Shootist, U.S. Grant, and others)
·
E.M.F.
Hartford
·
E.M.F.
Dakota II
or
Dakota III
·
Taylor’s & Co.
Outlaw Legacy (
NOT
the Remington Outlaw)
,
Single Action Stag*
,
Cattle Brand Engraved
, or other Engraved Pietta Revolvers such as
Teddy Roosevelt
, etc.;
·
Traditions Single Action
Frontier
or
Rawhide
revolvers
·
Century Arms 1873
Millenium
If you do not see your pistol listed, please drop us an email with your model name and we will verify your revolver.
IMPORTANT!
*PLEASE NOTE
: if you have a
BRASS
gripframe (such as found on the Cimarron “Pistolero” or Taylor’s “1873 Single Action Stag” revolvers), please send us an immediate followup email after your purchase informing us that 1) your revolver has a brass gripframe, and 2) please send the two-letter or two-number code found in the small square box stamped underneath or on the side of the receiver.  This is shown in the second photo as an example.  We will need this code to make sure you get the correct grips.  If you do not have a brass gripframe, we do not need the code.
What these WILL NOT FIT
:
1.  Please note that these grips are made to fit
ONLY
the Pietta Model 1873 style Single Action revolvers, with the typical SAA “plowhandle” shaped gripframe, and will
NOT
fit any revolvers from other makers (such as Uberti, Armi San Marco, Colt, Ruger, etc.).  These grips will also
NOT
fit the Bisley, the Birdshead, the Thunderer, Thunderball, or the Lightning style revolvers, nor any of the Remington style revolvers such as the 1858, 1875, or 1890, from ANY maker, which use a completely different shaped gripframe.
2.  In addition, these
WILL NOT FIT
grip frames which are around 3-1/2” tall.  To make sure you are ordering the correct grip,
please check your grip frame measurement prior to ordering
.  Y
our grips or grip frame should measure somewhere between
3-1/16 – 3-1/8”
tall, depending on how you hold your ruler, tape, or caliper.  The important thing is to make sure they are NOT around 3-1/2” tall.  EMF’s
Alchimista
,
Cimarron’s
Bad Boy
, or Cimarron’s
El Malo 2
, for example, have the taller (3-1/2” tall) grip frame.   If you have one of these, our Pietta 1860 Army revolver grips will work for these.
Please contact us if you cannot find what you need, or if you have any questions.  We are always happy to help.
A note on the Italian-produced Revolvers:
The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made a huge number of makes and models and grip frame profiles with varying configurations over the years.  We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms.   Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory.  We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.
For an additional charge, custom fitting is an option.  Please contact us for further details if you are interested in custom fitting.
02252100
Arizona Custom Grips
About
Magna-Tusk™
Ivory and Stag Grips:
Magna-Tusk™
Ivory and Stag grips, a product of
Arizona Custom Grips
, are manufactured out of our high-grade, high density ivory material designed from the beginning as a premium, high-strength grip material.
Vastly superior to standard bonded ivory or stag found on most factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag.  It is rock-solid, stable, and water, chemical, and oil resistant.  It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials.  Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat.  It is filled with premium natural compounds to produce outstanding aesthetic properties and mechanical performance.  When aged with our natural aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing.  In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips.
08292000
The photo used is a stock photo (a sample pair).  Yours will appear similar to these.